PIAP SCOUT®
PIAP SCOUT® is a robot designed for quick reconnaissance of field and hard-to-access places. Owing to its modular structure, it is possible to use it as a mobile platform for inspection of, e.g. vehicle chassis or narrow rooms.
Special features of the robot include: excellent manoeuvrability and high speed (7 km/h). Owing to its specific drives, the robot efficiently travels across uneven terrain and obstacles of inclination angle up to 45°. The robot’s wheels are easily removed, which allows for a reduction of the robot’s overall dimensions. Small weight and compact size facilitate transportation and enable carrying the robot in, e.g. a backpack.
PIAP SCOUT Leaflet 0.33 MB
Technical data
( all weights and dimensions are approximate and details are subject to change without notification )
Dimensions
67 x 54 x 57 cm (LxWxH)
Length of the robot + front tracks
75 cm
Total mass (with batteries, manipulator and main camera)
27,5 kg
Speed
up to 7 km/h
Manipulator’s maximum lift
up to 5 kg
Manipulator’s maximum range
vertically: 1,17 m – from the rotation axis; 0,84 m – from the edge of the tracks
No. of degrees of freedom (manipulator)
2 + clamp of gripper
No. of robot’s cameras
4
Maximum battery operation time
approx. 2 h
Drive system
track-wheel
Accessories
- for recoilless disruptors RE 70M3 Plus – Chemring, Proparms Recoilless 12,5 mm & 20 mm),with adaptor also serves PROPARMS and NEUTREX and other recoilless disruptors.
- Equipment:
– camera with IR illuminators for day and night vision – weight [kg]: 2.1,
– lasers (2 pcs.),
– safety switch, - weight:[kg]: 2,1
- dimensions [cm]: 12-20.5(W) x 14(H) x 11(L)
- enables mounting a Benelli M4 Super 90 rifle
- equipped with laser sight, accessories connector and safety switch
- materials: steel + aluminium
- weight [ kg]: 3
- dimensions [cm]: 68(L) x 24(H) x 10.5(W)
adapter for X-ray device is composed of:
– adapter to mount the device in the gripper
– telescopic boom
– screen holder
– radiation generator holder
nsor
- uenables steering the robot without radio communication
- essential for connecting the repeater
- the passive fibre optic cable winder set consists of:
– body
– crank
– short fibre optic cable
– long fibre optic cable (on the reel)
– RIS rail holders - weight [kg]: 3.1
- dimensions [cm]: 21(L) x 25(W) x 28(H)
- technical specification of the fibre optic:
– minimum bending radius: 25mm
– maximum tensile force: 300N (30.5 kg) - Available length: [m]: 150, 300
- enables steering the robot without radio communication
- cable length: up to 300m
- weight [kg]: 6.15
- dimensions [cm]: 28(L) x 23(W) x 24(H)
- for remote detonation of the explosives
enables remote location of antennae
- PIAP SCOUT works with a negotiation kit which consists of:
two microphones and one loudspeaker installed on the mobile base and a microphone connected to the control panel - Negotiation kit requires fibre optic remote control
Digital recorder for recording image obtained from the robot
- small steering panel
- internal battery (charger 230v)
- weight [kg]: 0.43
- dimensions [cm]: 16.5(L) x 11(W) x 3.5 [+3.5 joysticks] (H)
- range: [m]: 10 (in the open area)
- operating time: estimated at min. 1h
- additional battery for the robot / control panel
- Enables continuous work of the control panel, while connecting to power source
łączenia do źródła prądu
- Doubles the operating capacity of the robot
- Requires the installation of fibre optic cable or passive fibre optic winder.
- the device works automatically and requires no other action from the operator
- the breaker consists of a the bolt terminated with sintered carbide and an inner hammer system. The housing allows the device to be held with gripper jaws.
- metal transport basket for safe transport of heavy loads
- Environmental swab
- Ground sampler
- Forensic samplers set
- SPME adsorber
- R – Sensor (integrated EKO-C)
- Knocking windows, knocking holes in surfaces and lock fittings or other small parts
(the principle of „pile driver”) - Piercing objects, e.g. tires
- Breaking hinges
- Cutting metal rods, cables, wires, chains, tubes
- Cutting off elements
- Initiating non-electric detonators such as STS, NDS, NONEL
- Basic operating tips:
– Cutter for cable, wire and rod;
– Punches for windows and other components;
– Triggers to initiate explosion with non-electric detonation systems
– Cutters (knives and blades)- Possibility of designing tips for specific needs of the user
- for detection of errors and faults in the robot
- for changing settings and configuration of the robot
- accessories and SVGA connector
- enables vision at night
- fixed near the gripper camera
- power supply from the robot
- remote turn off function located near the camera view switch
- dimensions [cm]: 20(L) x 9 (H)
We declare willingness to modify the robot and optional equipment according to the user’s needs.
